How do I use AgentX++'s subagent example with snmpd (UCD-SNMPimplementation)?
Goh, Betty
betty.goh____glenayre.com
Fri Nov 1 10:40:45 CET 2002
Hi Frank,
Yes, the subagent is running. It keeps reflecting back these messages:
20021101.15:15:01 1115: (5)INFO : AgentXSlave: no request within (milli
seconds): (20000)
20021101.15:15:01 1115: (3)EVENT : AgentX: sending agentx pdu
(sd)(type)(sid)(tid)(pid)(err))(errind): (5), (13), (5), (119), (137), (0),
(0)
I went to the /var/agentx directory and saw that the access rights are as
follows:
drwx------ 2 root root 4096 Nov 1 15:01 agentx
inside agentx directory
srwxr-xr-x 1 root root 0 Nov 1 15:01 master
srwxr-xr-x 1 root root 0 Nov 1 15:02 subagent13115
The date and time of both these files are updated when I run the commands
for snmpd and subagent.
I'm running all these as root. What should be the owner and access rights
for the master file in /var/agentx directory?
Thanks!
regards,
Betty
Tel:(65)6483-9702
Email:betty.goh____glenayre.com
-----Original Message-----
From: Frank.Fock____t-online.de [mailto:Frank.Fock____t-online.de]
Sent: Friday, November 01, 2002 9:41 AM
To: Goh, Betty
Cc: 'agentpp-dl____agentpp.com'
Subject: Re: How do I use AgentX++'s subagent example with snmpd
(UCD-SNMPimplementation)?
Hi Betty,
I saw your post on com.protocols.snmp. Did you get the
AgentX++ subagent running?
You will need to create /var/agentx/master with an
appropriate owner and access rights.
(May be its easier to run AgentX over TCP for the first
attempt.)
Hope this helps.
Best regards,
Frank
Goh, Betty wrote:
> Hi Everyone,
>
> I'm new to snmp and AgentX++ and I have some questions that I hope you can
> help me.
>
> I've just downloaded AgentX++/AGENT++/SNMP++ to try out the AgentX
> implementation and followed the instructions on the INSTALL file compiling
> them. I first tested AgentX++'s master agent and subagent implementation
and
> it seemed to work okay when I use SNMP++'s snmpGet and snmpWalk..
>
> However when I tried to use AgentX++'s subagent with snmpd (as the master
> agent), it doesn't work.
>
> I ran the snmpd with the following command "snmpd -p 4700 -x
> /var/agentx/master".
>
> Then I did a snmpwalk like this "snmpwalk -t 120 -p 4700 linux3 public
> .1.3.6.1.4.1.4976.6.1.2". It gave me timeout error. I tried to ping linux3
> and linux3 is up and running.
>
> Can someone guide me step by step as to how to make this work?
>
> By the way, I'm working on Linux version 7.2 and the UCD-SNMP is version
> 4.1.2.
>
> Many thanks.
>
> regards,
> Betty
>
>
More information about the AGENTPP
mailing list