This WWW service MIB module is applicable to services realized by a family of 'Document Transfer Protocols' (DTP). Examples of DTPs are HTTP and FTP. not-accessible current 1.3.6.1.2.1.65.1.1.1.1 Details about a particular WWW service. not-accessible current 1.3.6.1.2.1.65.1.2.1.1 Overview statistics for an individual service. not-accessible current 1.3.6.1.2.1.65.1.2.2.1 Request statistics for an individual service. not-accessible current 1.3.6.1.2.1.65.1.2.3.1 Request statistics for an individual service. not-accessible current 1.3.6.1.2.1.65.1.2.4.1 Response statistics for an individual service. not-accessible current 1.3.6.1.2.1.65.1.2.5.1 Response statistics for an individual service. not-accessible current 1.3.6.1.2.1.65.1.3.1.1 An entry used to configure the wwwDocLastNTable, the wwwDocBucketTable, the wwwDocAccessTopNTable, and the wwwDocBytesTopNTable. not-accessible current 1.3.6.1.2.1.65.1.3.2.1 An entry which describes a recent access attempt. not-accessible current 1.3.6.1.2.1.65.1.3.3.1 An entry which describes the parameters associated with a particular bucket. not-accessible current 1.3.6.1.2.1.65.1.3.4.1 An entry in the top N table sorted by document accesses. not-accessible current 1.3.6.1.2.1.65.1.3.5.1 An entry in the top N table sorted by network traffic. read-only current 1.3.6.1.2.1.65.1.1.1.1.2 Textual description of the WWW service. This shall include at least the vendor and version number of the application realizing the WWW service. In a minimal case, this might be the Product Token (see RFC 2068) for the application. "255a" read-only current 1.3.6.1.2.1.65.1.1.1.1.3 The textual identification of the contact person for this service, together with information on how to contact this person. For instance, this might be a string containing an email address, e.g. '<webmaster@domain.name>'. "255a" read-only current 1.3.6.1.2.1.65.1.1.1.1.4 An identification of the primary protocol in use by this service. For Internet applications, the IANA maintains a registry of the OIDs which correspond to well-known application protocols. If the application protocol is not listed in the registry, an OID value of the form {applTCPProtoID port} or {applUDPProtoID port} are used for TCP-based and UDP-based protocols, respectively. In either case 'port' corresponds to the primary port number being used by the protocol. read-only current 1.3.6.1.2.1.65.1.1.1.1.5 The fully qualified domain name by which this service is known. This object must contain the virtual host name if the service is realized for a virtual host. "255a" read-only current 1.3.6.1.2.1.65.1.1.1.1.6 The application type using or realizing this WWW service. 1 2 3 4 5 read-only current 1.3.6.1.2.1.65.1.1.1.1.7 The date and time when this WWW service was last started. The value SHALL be '0000000000000000'H if the last start time of this WWW service is not known. "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" read-only current 1.3.6.1.2.1.65.1.1.1.1.8 Indicates the operational status of the WWW service. 1 2 3 4 5 read-only current 1.3.6.1.2.1.65.1.1.1.1.9 The date and time when this WWW service entered its current operational state. The value SHALL be '0000000000000000'H if the time of the last state change is not known. "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" read-only current 1.3.6.1.2.1.65.1.2.1.1.1 The number of requests successfully received. read-only current 1.3.6.1.2.1.65.1.2.1.1.2 The number of requests generated. read-only current 1.3.6.1.2.1.65.1.2.1.1.3 The number of responses successfully received. read-only current 1.3.6.1.2.1.65.1.2.1.1.4 The number of responses generated. read-only current 1.3.6.1.2.1.65.1.2.1.1.5 The number of content bytes received. read-only current 1.3.6.1.2.1.65.1.2.1.1.6 The lowest thirty-two bits of wwwSummaryInBytes. read-only current 1.3.6.1.2.1.65.1.2.1.1.7 The number of content bytes transmitted. read-only current 1.3.6.1.2.1.65.1.2.1.1.8 The lowest thirty-two bits of wwwSummaryOutBytes. read-only current 1.3.6.1.2.1.65.1.2.2.1.2 The number of requests of this type received by this WWW service. read-only current 1.3.6.1.2.1.65.1.2.2.1.3 The number of content bytes per request type received by this WWW service. read-only current 1.3.6.1.2.1.65.1.2.2.1.4 The date and time when the last byte of the last complete request of this type was received by this WWW service. The value SHALL be '0000000000000000'H if no request of this type has been received yet. "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" read-only current 1.3.6.1.2.1.65.1.2.3.1.2 The number of requests of this type generated by this WWW service. read-only current 1.3.6.1.2.1.65.1.2.3.1.3 The number of content bytes per requests type generated by this WWW service. read-only current 1.3.6.1.2.1.65.1.2.3.1.4 The date and time when the first byte of the last request of this type was send by this WWW service. The value SHALL be '0000000000000000'H if no request of this type has been send yet. "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" read-only current 1.3.6.1.2.1.65.1.2.4.1.2 The number of responses of this type received by this WWW service. read-only current 1.3.6.1.2.1.65.1.2.4.1.3 The number of content bytes per response type received by this WWW service. read-only current 1.3.6.1.2.1.65.1.2.4.1.4 The date and time when the last byte of the last complete response of this type was received by this WWW service. The value SHALL be '0000000000000000'H if no response of this type has been received yet. "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" read-only current 1.3.6.1.2.1.65.1.2.5.1.2 The number of responses of this type generated by this WWW service. read-only current 1.3.6.1.2.1.65.1.2.5.1.3 The number of content bytes per response type generated by this WWW service. read-only current 1.3.6.1.2.1.65.1.2.5.1.4 The date and time when the first byte of the last response of this type was sent by this WWW service. The value SHALL be '0000000000000000'H if response of this type has been send yet. "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" read-write current 1.3.6.1.2.1.65.1.3.1.1.1 The maximum number of entries in the wwwDocLastNTable. read-write current 1.3.6.1.2.1.65.1.3.1.1.2 This object allows a manager to lock the wwwDocLastNTable in order to retrieve the wwwDocLastNTable in a consistent state. The agent is expected to take a snapshot of the wwwDocLastNTable when it is locked and to continue updating the real wwwDocLastNTable table so that recent information is available as soon as the wwwDocLastNTable is unlocked again. Setting this object to a value greater than 0 will lock the table. The timer ticks backwards until it reaches 0. The table unlocks automatically once the timer reaches 0 and the timer stops ticking. A manager can increase the timer to request more time to read the table. However, any attempt to decrease the timer will fail with an inconsistentValue error. This rule ensures that multiple managers can simultaneously lock and retrieve the wwwDocLastNTable. Note that managers must cooperate in using wwwDocCtrlLastNLock. In particular, a manager MUST not keep the wwwDocLastNTable locked when it is not necessary to finish a retrieval operation. read-write current 1.3.6.1.2.1.65.1.3.1.1.3 The maximum number of buckets maintained by the agent before the oldest bucket is deleted. The buckets are used to populate the wwwDocAccessTopNTable and the wwwDocBytesTopNTable. The time interval captured in each bucket can be configured by setting the wwwDocCtrlBucketTimeInterval object. read-write current 1.3.6.1.2.1.65.1.3.1.1.4 The time interval after which a new bucket is created. Changing this object has no effect on existing buckets. read-write current 1.3.6.1.2.1.65.1.3.1.1.5 The maximum number of entries shown in the wwwDocAccessTopNTable and the wwwDocBytesTopNTable. Changing this object has no effect on existing buckets. read-only current 1.3.6.1.2.1.65.1.3.2.1.2 The name of the document for which access was attempted. "255a" read-only current 1.3.6.1.2.1.65.1.3.2.1.3 The date and time of the last attempt to access this document. "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" read-only current 1.3.6.1.2.1.65.1.3.2.1.4 The protocol request type which was received by the server when this document access was attempted. read-only current 1.3.6.1.2.1.65.1.3.2.1.5 The protocol response type which was sent to the client as a result of this attempt to access a document. This object contains the type of the primary response if there were multiple responses to a single request. read-only current 1.3.6.1.2.1.65.1.3.2.1.6 This object contains a human readable description of the reason why the wwwDocLastNResponseType was returned to the client. This object defines the implementation-specific reason if the value of wwwDocLastNResponseType indicates an error. For example, this object can indicate that the requested document could not be transferred due to a timeout condition or the document could not be transferred because a 'soft link' pointing to the document could not be resolved. "255a" read-only current 1.3.6.1.2.1.65.1.3.2.1.7 The number of content bytes that were returned as a result of this attempt to access a document. read-only current 1.3.6.1.2.1.65.1.3.3.1.2 The date and time when the bucket was made available. "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" read-only current 1.3.6.1.2.1.65.1.3.3.1.3 The total number of access attempts for any document provided by this WWW service during the time interval over which this bucket was created. read-only current 1.3.6.1.2.1.65.1.3.3.1.4 The total number of different documents for which access was attempted this this WWW service during the time interval over which this bucket was created. read-only current 1.3.6.1.2.1.65.1.3.3.1.5 The total number of content bytes which were transferred from this WWW service during the time interval over which this bucket was created. read-only current 1.3.6.1.2.1.65.1.3.4.1.2 The name of the document for which access was attempted. "255a" read-only current 1.3.6.1.2.1.65.1.3.4.1.3 The total number of access attempts for this document. read-only current 1.3.6.1.2.1.65.1.3.4.1.4 The total number of content bytes that were transmitted as a result of attempts to access this document. read-only current 1.3.6.1.2.1.65.1.3.4.1.5 The protocol response type which was sent to the client as a result of the last attempt to access this document. This object contains the type of the primary response if there were multiple responses to a single request. read-only current 1.3.6.1.2.1.65.1.3.5.1.2 The name of the document for which access was attempted. "255a" read-only current 1.3.6.1.2.1.65.1.3.5.1.3 The total number of access attempts for this document. read-only current 1.3.6.1.2.1.65.1.3.5.1.4 The total number of content bytes that were transmitted as a result of attempts to access this document. read-only current 1.3.6.1.2.1.65.1.3.5.1.5 The protocol response type which was sent to the client as a result of the last attempt to access this document. This object contains the type of the primary response if there were multiple responses to a single request. The WwwResponseType defines the different response values used by document transfer protocols. For the proper values for a given DTP, refer to the protocol mappings for that DTP. The WwwRequestType defines the textual identification of request types used by a document transfer protocol. For the proper values for a given DTP, refer to the protocol mappings for that DTP. The server relative name of a document. If the URL were http://www.x.org/standards/search/search.cgi?string=test then the value of this textual convention would resolve to '/standards/search/search.cgi'. This textual convention uses the character set for URIs as defined in RFC 2396 section 2. "255a" The operational status of a WWW service. 'down' indicates that the service is not available. 'running' indicates that the service is operational and available. 'halted' indicates that the service is operational but not available. 'congested' indicates that the service is operational but no additional inbound associations can be accommodated. 'restarting' indicates that the service is currently unavailable but is in the process of restarting and will be available soon. 1 2 3 4 5