[SNMP4J] trap display problem

[Jiang]

Hi,

I am using SNMP4J to send trap and using AdventNet OpManager to capture it.
But all the traps cannot be displayed in full, as shown below:

     Attention       May 17,2006 08:44:20 PM      convertercoldstart is
received from 10.226.200.107 with the following related information :
sysUpTime: 0 hours, 0 minutes, 0 seconds. , .1.3.6.1.6.3.1.1.4.1.0:
.1.3.6.1.4.1.3830.65.1.1.100.2.1, .1.3.
    Critical     May 17,2006 08:38:43 PM     convertercoldstart is received
from 10.226.200.107 with the following related information : sysUpTime: 0
hours, 0 minutes, 0 seconds. , .1.3.6.1.6.3.1.1.4.1.0:
.1.3.6.1.4.1.3830.65.1.1.100.2.1, .1.3.

You may notice that the varbind is not a complete one. I did a tcpdump and
it shows everything well:

Simple Network Management Protocol
    Version: 2C (1)
    Community: public
    PDU type: TRAP-V2 (7)
    Request Id: 0x35692f17
    Error Status: NO ERROR (0)
    Error Index: 0
    Object identifier 1: 1.3.6.1.2.1.1.3.0 (SNMPv2-MIB::sysUpTime.0)
    Value: Timeticks: (59) 0:00:00.59
    Object identifier 2: 1.3.6.1.6.3.1.1.4.1.0 (SNMPv2-MIB::snmpTrapOID.0)
    Value: OID: SNMPv2-SMI::enterprises.3830.65.1.1.100.2.1
    Object identifier 3: 1.3.6.1.4.1.3830.65.1.1.100.1.1 (SNMPv2-SMI::
enterprises.3830.65.1.1.100.1.1)
    Value: STRING: "2006-05-17 20:52:10"
    Object identifier 4: 1.3.6.1.4.1.3830.65.1.1.100.1.2 (SNMPv2-SMI::
enterprises.3830.65.1.1.100.1.2)
    Value: STRING: "info"
    Object identifier 5: 1.3.6.1.4.1.3830.65.1.1.100.1.3 (SNMPv2-SMI::
enterprises.3830.65.1.1.100.1.3)
    Value: STRING: "snmpAgent started!"

So I am thinking if it is opmanager's problem? Or if I have missed something
here?

Thanks!

-- 
Regards,
Jiang Lei