[SNMP4J] snmp4j 2.2.5 3DES, AES192/256 not working

[Frank Fock]

Hi Narayanarao,

It works for others (including me). I will not investigate this issue, 
unless you provide
two small sample programs (source code - unzipped) that reproduces the 
issue on your site
(sender + receiver).
You can send the source code to support at agentpp.com to avoid bounces.
Please note, that ZIP files might be dropped in mail junk.

Best regards,
Frank

Am 23.05.2014 06:21, schrieb NarayanaRao Yenduri:
> Hi Frank,
> the same code works fine with DES and AES128 protocols. so i am not 
> sure what could be the problem.
> i did not change any other credentials except privacy protocol.
> let me know if you want me to enable any debugs or how can i share the 
> packet captures(earlier the mail is bounced saying size is large).
>
> Thanks
> Narayanarao
> On Friday, May 23, 2014 2:41 AM, Frank Fock <fock at agentpp.com> wrote:
>
>
> Hi Narayanarao,
>
> There must be an error on your site. I see no reason why GET and 
> RESPONSE should work
> and TRAP shouldn't.
> Are you aware of the fact, that with traps and notifications, the 
> sender is authoritative and not
> the receiver?
>
> Best regards,
> Frank
>
> Am 22.05.2014 10:11, schrieb NarayanaRao Yenduri:
>> Yes Frank. after correcting it on sender side, i did not see the 
>> exception. but on the receiver side i did not see the trap.
>> when i enabled wireshark at sender side, i could see malformed packet 
>> error (with privacy protocols - 3DES/AES192/AES256). but  it is 
>> working fine with DES/AES128.
>>
>> any suggestions?
>>
>> i attached wireshark captures, it bounced back because of big mail size.
>>
>> Appreciate your quick reply.
>> Thanks
>> Narayanarao
>>
>
> -- 
> ---
> AGENT++
> Maximilian-Kolbe-Str. 10
> 73257 Koengen, Germany
> https://agentpp.com  <https://agentpp.com/>
> Phone: +49 7024 8688230
> Fax:   +49 7024 8688231
>
>

-- 
---
AGENT++
Maximilian-Kolbe-Str. 10
73257 Koengen, Germany
https://agentpp.com
Phone: +49 7024 8688230
Fax:   +49 7024 8688231